Focet Valves Private Limited

"FOCET" MAKE  Pneumatic ball valves are used to control the flow of a media, liquid or gas, by means of a rotating ball with a bore. The rotating ball is controlled by a pneumatic actuator that is capable of turning it. A ball valve is one of the most common valves due to their simple operation, reliability, long service life, and wide range of

• 2-way pneumatic ball valves have 2 ports, an inlet and an outlet. The media flows from one direction to the other and the valve is used to open or close the flow. A 2-way ball valve is commonly called a shut off valve.

Pneumatic Acuated

A pneumatic actuated ball valve can be broken down into two main components. The pneumatic actuator and the ball valve. For a 2-way ball valve, the pneumatic actuator can turn the ball 90 degrees to be either fully open or fully closed. For a 3-way valve, the pneumatic actuator can turn the ball between different circuits depending if it is an L-port or T-port ball valve. They are mounted together typically with a standard flange adhereing to ISO 5211. This allows both the pneumatic actuator or ball valve to be swapped out with another one using the same flange size.

A pneumatic actuator requires compressed air to operate. The actuator can either be single or double acting. A single acting pneumatic actuator uses compressed air to rotate the ball in one direction and uses a spring to move it back to the normal position. A double acting pneumatic actuator requires compressed air to move the ball in either direction. An air actuated ball valve is a reliable solution and often a lower investment cost for larger valves compared to an electric ball valve. There are various housings and sizes of pneumatic ball valves to allow you to find the right one for your application. Air operated ball valves are commonely used for remote control of a flow, like a water pipe or air hose.

Brass Ball Valve – Description

A brass ball valve is a type of quarter-turn valve used to start, stop, or control the flow of liquids and gases. It uses a rotating ball with a hole (bore) inside it to regulate flow.

🔧 Key Features

• Quarter-turn operation: Opens or closes fully with a 90° turn of the handle

• Quick shut-off: Instant stop/start of flow

• Durable material: Made from brass, which offers good corrosion resistance and strength

• Tight sealing: Provides leak-proof operation with proper seats (usually PTFE)

• Low maintenance: Simple design with fewer moving parts

⚙️ Working Principle

• Inside the valve is a spherical ball with a hole through its center.

• When the handle is turned:

  • Hole aligned with pipe → Flow ON

  • Hole perpendicular → Flow OFF

A forged steel 3-piece ball valve is a robust industrial valve used for on/off control of fluid flow in demanding conditions such as high pressure, high temperature, and critical process systems. It combines the strength of forged steel with a three-piece body design for durability and easy maintenance.

🔧 Key Features

• 3-piece construction: Two end connections + one central body, allowing easy disassembly

• Forged steel body: Higher strength and reliability compared to cast valves

• Quarter-turn operation: Opens or closes fully with a 90° handle rotation

• Leak-tight sealing: Uses soft seats (PTFE/RPTFE) or metal seats for tight shut-off

• Blow-out proof stem: Ensures safety under high pressure

• Fire-safe / anti-static design: Available for hazardous environments

⚙️ Working Principle

• Inside the valve is a solid ball with a bore (hole).

• When the handle is rotated:

  • Parallel to pipeline → Valve OPEN (flow passes through)

  • Perpendicular → Valve CLOSED (flow blocked)

•  

Three piece ball valve is preferred wherever regular cleaning is required. The valve body is composed of three separate pieces held together by bolts, which can be easily removed for cleaning and servicing. A unique advantage of the three piece valve design is that the ball valve ends can remain threaded into the pipe, while the center section containing the ball can be removed. These three piece ball valves have been specifically designed to be easily disassembled, cleaned, and reassembled. three piece stainless Steel ball valves also called three SS ball valves, are widely used for a variety of sanitary applications that are required for pharmaceutical and food/beverage industries.

"FOCET" MAKE ball valve is a type of valve widely used in various industries to control the flow of fluids. It is known for its simplicity, reliability, and effectiveness. Here’s a detailed look at its characteristics and common uses:Characteristics:

1. Design:

   • Ball: The valve has a spherical ball with a hole (or port) through the center. When the ball is rotated, the hole aligns with the flow path (fully open) or is perpendicular to it (fully closed).
   • Body: Typically made from metals like stainless steel, brass, or carbon steel, but can also be made from plastics for specific applications.
   • Actuation: Can be operated manually with a lever or automatically with a motorized actuator.

2. Operation:

   • Quarter-Turn Mechanism: The ball valve operates with a 90-degree turn of the handle or actuator to open or close the valve.
   • Seal: Utilizes a tight seal around the ball to prevent leaks when the valve is closed.

3. Flow Control:

   • Full Bore: Some ball valves have a full-bore design where the diameter of the ball is the same as the pipeline, offering minimal pressure drop.
   • Reduced Bore: The ball is smaller than the pipeline, which can restrict flow but may be more cost-effective.

Uses:

1. On/Off Control:

   • Isolation: Ideal for applications where a quick and reliable shutoff is needed. When the valve is closed, it fully isolates the section of the pipeline.
   • Simple Operation: Easy to operate with a quarter-turn motion, making it straightforward for on/off control.

2. Flow Regulation:

   • Not Ideal for Throttling: While ball valves are primarily designed for on/off control, they can be used for throttling in certain cases. However, they are not typically recommended for precise flow regulation due to potential damage to the sealing surfaces.

3. Pipeline Systems:

   • Industrial Pipelines: Common in water, oil, gas, and chemical pipelines due to their durability and reliability.
   • HVAC Systems: Used in heating, ventilation, and air conditioning systems for controlling flow.

4. Water Treatment:

   • Control and Isolation: Used in water treatment plants for isolating different sections of the system and controlling the flow of treated water.

5. Oil and Gas Industry:

   • High Pressure and Temperature: Suitable for handling high-pressure and high-temperature fluids due to its robust design.

6. Chemical Processing:

   • Corrosion Resistance: Often used in chemical processing where corrosion resistance and leak-tight performance are critical.

7. Residential and Commercial Plumbing:

   • Durability and Maintenance: Common in plumbing systems for its durability and ease of maintenance.

Advantages:

• Reliability: Provides a tight seal when closed, minimizing the risk of leakage.
• Durability: Suitable for high-pressure and high-temperature applications.
• Ease of Use: Simple operation with a quick 90-degree turn.
• Low Maintenance: Minimal maintenance requirements compared to other valve types.
• Versatility: Can be used in a wide range of applications and fluids.

In summary, ball valves are a reliable and efficient choice for controlling and isolating fluid flow in various applications. Their robust design and straightforward operation make them suitable for a wide range of industrial, commercial, and residential uses.

We are successfully meeting the requirements of our clients by offering the best quality range of 3PC Flanged Ball Valve

Focet Valves Private Limited,” are engaged in Manufacturing, Supplying And Exporting the finest quality range of Gate Valve, Pulp Valve, Globe Valve, Sight Glass, Pinch Valve, Check Valve, Steam Trap, Non Return Valve, etc

"FOCET" MAKE A 3-piece screwed end ball valve is a type of ball valve that consists of three main parts: a body, a ball, and an end connector with screw threads. It is a versatile valve commonly used in various industries for its reliable shut-off capabilities and ease of operation.

Here’s a description of the components and features of a typical 3-piece screwed end ball valve:

• Body: The body of the valve is usually made of metal, such as stainless steel, brass, or carbon steel. It provides the housing for the other internal components and is designed to withstand the pressure and temperature requirements of the system it’s installed in. The body has female threaded connections on each end to allow for easy installation and connection to the pipeline.
• Ball: The ball is the key component that controls the flow of the media (liquids, gases, or slurries) passing through the valve. It has a hole through its center that allows the fluid to flow when the valve is in the open position. When the valve is closed, the ball rotates 90 degrees to block the flow path, creating a tight shut-off. The ball is usually made of a highly durable material like stainless steel or brass to ensure longevity and resistance to corrosion.
• End Connector: The end connectors are threaded to allow for easy installation and connection to the piping system. They come with either male or female threads, depending on the specific application and the need to connect to other fittings or equipment. The screwed end design provides a secure and leak-tight connection.

Key features of a 3-piece screwed end ball valve include:

• Easy Maintenance: The 3-piece design allows for the valve to be disassembled into three parts for easy maintenance and cleaning without removing it from the pipeline.
• Versatility: These valves are suitable for a wide range of applications, including general purpose, industrial, and commercial processes.
• Positive Shut-Off: The quarter-turn operation of the ball provides quick and reliable shut-off capabilities, minimizing fluid loss and preventing leakage.
• High Pressure and Temperature Resistance: The construction materials used in the valve make it capable of handling high-pressure and high-temperature applications.
• Corrosion Resistance: The materials used in the valve’s construction offer excellent resistance to corrosion, ensuring a long service life even in harsh environments.

3-piece screwed end ball valves are commonly used in various industries, including oil and gas, chemical processing, water treatment, pharmaceuticals, and more. Their straightforward design, ease of maintenance, and reliable performance make them a popular choice for controlling the flow of fluids in different processes

We are a unique entity in the industry, actively committed towards providing an optimum quality range of 2 Piece Flanged End Ball Valve.

Focet Valves Private Limited,” are engaged in Manufacturing, Supplying And Exporting the finest quality range of Gate Valve, Pulp Valve, Globe Valve, Sight Glass, Pinch Valve, Check Valve, Steam Trap, Non Return Valve

"FOCET" MAKE JACKETED BALL VALVE
 The jacket covers the body from one flange to the other flange. The body is modified by adding oversize flanges. As example: 2″ x 3″ Jacketed Ball Valve has the nominal bore of 2″ (DN 50) and the flange size is 3″(DN 80). It allows enough space for bolting clearance.

The Jackets assure consistent valve Heating or Cooling of the process media to prevent crystallization or seizing of flow media. The Jacketed Ball Valve (Heating Jacket Ball Valve) with very well design to help the high temperature steam or oil flow over the valve ball & body parts to keep the media liquid. This applies especially to media like bitumen and liquid sulfur. In addition, the efficient flow of media is ensured through the elimination of pockets.

Generally standard Jacketed Ball Valves are delivered in carbon steel and different types of stainless steel materials. Other special materials are available upon special request.

Flow Control System Jacketed P.T.F.E. seated Ball Valves gives Zero Leakage, Tight Shut-Off and Low Torque with easy smooth operation at temperature ranging from -20° C. to +220° C. Electro-Polished, Buff Finish & Ultra clean valve also provided for Food & Pharmaceutical Industries on request.

Salient Features:

 

• High Performance Ball Valve
• Longer Life
• Positive Shut off
• Quick in Action
• No Lubrication
• Compact Design
• Low Pressure Drop
• Simplicity
• Heating / Cooling Jackets
• Wide selection of Different Jacket Material

Design & Testing International Standard: 

We are engaged in offering a wide range of 4.1 PC Flanged Ball Valve to our clients. Our range of all products is widely appreciated by our clients.